0
How to Configure PAT with Dynamic NAT with Pool of IP address using Packet Tracer
How to Configure PAT with Dynamic NAT with Pool of IP address using Packet Tracer

Here,we are going to see how to configure PAT with Dynamic NAT with Pool of IP address in packet tracer. Go to this link and first do a ...

Read more »

0
How to Configure NAT with PAT Port Address Translation Using Packet Tracer
How to Configure NAT with PAT Port Address Translation Using Packet Tracer

In this post we are going to see how to configure NAT with PAT(Port Address Translation) using packet tracer in a cisco routers. Step 1:...

Read more »

4
How to Configure Dynamic NAT Using Pool of IP Address in Pakcet Tracer and GNS 3
How to Configure Dynamic NAT Using Pool of IP Address in Pakcet Tracer and GNS 3

Here,we are going to configure dynamic NAT with Pool of Public ip Address range by using packet tracer.This type of Natting provides prote...

Read more »

2
How to Configure Static NAT using Packet Tracer and GNS3 in a Cisco Router
How to Configure Static NAT using Packet Tracer and GNS3 in a Cisco Router

Here,we are going to see how to configure static NAT using packet tracer. Step 1:Create topology like this, Step 2:Configure...

Read more »

0
NAT Network Address Translation Static Dynamic NAT with PAT
NAT Network Address Translation Static Dynamic NAT with PAT

NAT - Network Address Translation NAT was introduced to reduce the problems in IPv4 Address,i.e. shortage in ipv4 ip addresses.Address ...

Read more »

1
How to configure Single Extended Access List for Multiple Networks and Protocols using Packet Tracer and GNs3
How to configure Single Extended Access List for Multiple Networks and Protocols using Packet Tracer and GNs3

Here,we are going to see how to configure single extended access list for multiple networks using packet tracer and gns3. Step 1:Create...

Read more »

2
How to Configure Extended Access List Using Packet Tracer and GNS 3
How to Configure Extended Access List Using Packet Tracer and GNS 3

Here,we are going to see how to configure Extended Access List with a simple network topology. Extended Access List(100-199,2000-2699) ...

Read more »

0
How to Configure Single Standard Access List for Multiple Networks
How to Configure Single Standard Access List for Multiple Networks

Here,we are going to see how to configure standard access list for multiple networks. Step 1:Create a topology like this, and configure...

Read more »

4
How to Add or Remove Interfaces on Routers in Packet Tracer
How to Add or Remove Interfaces on Routers in Packet Tracer

How to add Extra Fastethernet/Gigabitethernet/Serial Interface in Packet Tracer Here we are going to see how to add are remove interface...

Read more »
 
 
Top